THE ANALYSIS OF THE WORKING CAPITAL LOAN (WCL) IN MANUFACTURING SECTORS IN BANTEN PROVINCE

Authors

  • Sakti Prabowo Politeknik Keuangan Negara STAN, Indonesia
  • Muhammad Heru Akhmadi Politeknik Keuangan Negara STAN, Indonesia
  • Akhmad Solikin Politeknik Keuangan Negara STAN, Indonesia

DOI:

https://doi.org/10.29040/ijebar.v8i1.11923

Abstract

The manufacturing sector is one of the economic sectors that plays a crucial role in economic development in Banten Province. This study aims to identify the impacts of the People’s Business Credit (KUR) Program on the manufacturing sector in Banten Province. The methodology used in this study is input-output analysis to determine how the KUR Program may influence the economic sectors, especially the manufacturing sector in Banten Province. The study uses the input-output table released by the Statistics Bureau at the regional level. In Banten Province, there are five sectors with the highest value of KUR. These sectors are Wholesale and Retail Trade, Accommodation and Food Service Activities, Other Service Activities, manufacturing, and Real Estate Activities. The result suggests that the KUR Program may have a good influence on the flourishing of manufacturing sectors in Banten Province. The KUR Program may have the most significant impact on the manufacturing sector when the KUR Program is distributed to the manufacturing sector itself. However, the allocation of the KUR Program to other economic sectors, especially Wholesale and Retail Trade: Repair of Motor Vehicles and Motorcycles, Accommodation and Food Service Activities, and Other Service Activities, may also have significant effects on the manufacturing sector. It may indicate that the KUR Program strategy in Banten Province may be suitable to develop the manufacturing sector in Banten Province.

References

BPS see Badan Pusat Statistik

Badan Pusat Statistik. (2019). Input-Output Table in Banten Province.

< https://banten.bps.go.id/subject/104/input-output.html>

Badan Pusat Statistik. (2022). Input-Output Table in Banten Province.

< https://banten.bps.go.id/subject/104/input-output.html>

Coordinating Ministry for Economic Affairs. (2023). KUR. Viewed 11 December 2023,

https://kur.ekon.go.id/gambaran-umum

Damayanti, M & Adam, L. (2015) Program Kredit Usaha Rakyat (KUR) sebagai Alat Pendorong

Pengembangan UMKM di Indonesia.

Jaya, T. J. (2018). Analisis Pengaruh Kredit Usaha Rakyat Terhadap Nilai Produksi Usaha Mikro

Kecil.

Hendranata, A, Brodjonegoro, BPS & Sinaga, BM. (2004). An Econometric Input-Output Model

for Indonesia: Economic Impact Analysis of Budget Development Expenditure.

Masruri. (2023). Mengungkap Rahasia Sukses Industri Manufaktur di Provinsi Banten. Widina

Media Utama.

Ministry of the State Secretariat. (2022). Gov’t Lowers People’s Business Credit to 3 Percent.

Viewed 11 December 2023, <https://setkab.go.id/en/govt-lowers-peoples-business-credit-to-3-percent>

Ministry of the National Development Planning/Bappenas. (2023). The Long Term National

Development Plan. < https://indonesia2045.go.id/>

Presidential Decree Number 6 Year 2007 about The Acceleration Policy of Real Sector

Development and Micro, Small, and Medium Enterprises and Cooperation.

Sudrajat, MA & Sulistiyowati, LN. (2018). Analysis of Business Loan Effect to Sustainability

Profit With Business Location as a Moderating Variable on Micro, Small, and Medium Enterprises (MSMEs) In Ngawi Regency

The World Bank. (2022). World Bank national accounts data, and OECD National Accounts

data files, viewed 11 December 2023, <https://data.worldbank.org/indicator/NV.IND.MANF.ZS>

Van Leeuwen, ES, Nijkamp P, & Rietveld P. (2005). Regional Input–Output Analysis.

Downloads

Additional Files

Published

2024-03-27

How to Cite

Prabowo, S., Akhmadi, M. H., & Solikin, A. (2024). THE ANALYSIS OF THE WORKING CAPITAL LOAN (WCL) IN MANUFACTURING SECTORS IN BANTEN PROVINCE. International Journal of Economics, Business and Accounting Research (IJEBAR), 8(1). https://doi.org/10.29040/ijebar.v8i1.11923

Issue

Vol. 8 No. 1 (2024): IJEBAR : Vol. 8, Issue 1, March 2024

Section

Articles

Citation Check

License

Authors who publish with IJEBAR agree to the following terms: Authors retain copyright and grant the IJEBAR right of first publication with the work simultaneously licensed under a Creative Commons Attribution License (CC BY-SA 4.0) that allows others to share (copy and redistribute the material in any medium or format) and adapt (remix, transform, and build upon the material) the work for any purpose, even commercially with an acknowledgement of the work's authorship and initial publication in IJEBAR. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in IJEBAR. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).

Most read articles by the same author(s)