ANALISIS PENGARUH  SISTEM MANAJEMEN KESELAMATAN  PADA KINERJA PROYEK DAN KEUNGGULAN KOMPETITIF

Sidiq Purnomo; Susilo Toto Rahardjo

doi:10.29040/jap.v23i2.7012

ANALISIS PENGARUH SISTEM MANAJEMEN KESELAMATAN PADA KINERJA PROYEK DAN KEUNGGULAN KOMPETITIF

Sidiq Purnomo, Susilo Toto Rahardjo

Abstract

Penelitian ini bertujuan untuk mengetahui praktik yang baik dalam manajemen keselamatan dan menganalisis pengaruh Sistem Manajemen Keselamatan pada indikator kinerja organisasi, terutama kinerja keselamatan karyawan, kinerja persaingan, dan kinerja proyek konstruksi. Populasi penelitian ini adalah perusahaan BUMN konstruksi di Indonesia, mitra kerjanya dan perusahaan swasta. Jumlah responden sebanyak 193 perusahaan. Analisis data dilakukan menggunakan Structural Equation Model dengan PLS. Hasil penelitian menunjukan bahwa Sistem Manajemen Keselamatan (SMK) memiliki pengaruh positif dan signifikan terhadap Keunggulan Kompetitif, Sistem Manajemen Keselamatan (SMK) memiliki pengaruh positif dan signifikan terhadap Kinerja Keselamatan, Sistem Manajemen Keselamatan (SMK) memiliki pengaruh positif dan signifikan terhadap Kinerja Proyek, Kinerja Keselamatan memiliki pengaruh positif dan signifikan terhadap Kinerja Proyek, dan Kinerja Proyek memiliki pengaruh positif dan signifikan terhadap Keunggulan Kompetitif.

Kata kunci : Sistem Manajemen Keselamatan (SMK), Keunggulan Kompetitif, Kinerja
Keselamatan, Kinerja Proyek

Full Text:

PDF

References

A.R. Hale, B.H.J. Heming, J. Carthey, B. K. (1997). Modelling of safety management systems. Safety Science, 26, 121–140. https://doi.org/10.1016/S0925-7535(97)00034-9.

Armstrong, C. E., & Shimizu, K. (2007). A review of approaches to empirical research on the resource-based view of the firm. Journal of management, 33(6), 959-986.

Andreoni, D. (1986). The Cost of Occupational Accidents and Diseases. Geneva.

Attwood, D., Khan, F., Veitch, B. (2006). Occupational accident models – where have we been and where are we going? Journal of Loss Prevention in the Process Industries, 19, 664–682.

BPJS Ketenagakerjaan, Annual Report Institution Performance, 2020, https://www.bpjsketenagakerjaan.go.id/assets/uploads/laporan_tahunan/BPJS_IR2020_LO15_Eng_Lowres.pdf

Bestratén, M., Gil, A., Piqué, T. (2003). Trabajo, La Gestión Integral de los Accidentes de Accidentes, (III): Costes de los Accidentes.

Bestratén, M. (1996). Criterios para el Análisis de Costes en Prevención. Salud y Trabajo, 117, 22–30.

Booth, R.T., Lee, T. R. (1995). The role of human factors and safety culture in safety management. Journal of Engineering Manufacture, 209, 393–400.

Bottani, E., Monica, L., & Vignali, G. (2009). Safety management systems: Performance differences between adopters and non-adopters. Safety Science, 47(2), 155–162. https://doi.org/10.1016/j.ssci.2008.05.001

Brody, B., Létourneau, Y., Poirier, A. (1990). An indirect cost theory of work accident prevention. Journal of Occupational Accident. Journal of Occupational Accident, 13, 255–270.

Centre, E. P. S. (1994). Safety Management Systems: Sharing Experiences in Process Safety. Institution of Chemical Engineers, London.

Charalambos, Z.K., Ioannis, S., George, N., & Dimitrios, C. (2010). Implementation of Hazard Analysis and Critical Control Point (HACCP) to the Production Line of beet Sugar, Molasses, and Pulp. Hellenic Sugar Industry.

Christensen, K., & Fahey, L. (1984). Building distinctive competences into competitive advantage. Strategic Planning Management, 2(1), 113-123.

Cox, S. and Vassie, L. (1998). Small and medium size enterprises interest in voluntary certification schemes for health and safety management - preliminary results. Safety Science, 29(1), 67–73.

F., A. (2010). Quality and Food Safety Systems: A Competitive ADvantage? In Asean Food and Security Conference. Singapore.

Fahmi, I. (2012). Analisis Kinerja Keuangan. Bandung: Alfabeta.

Fernández-Muñiz, B., Montes-Peón, J. M., & Vázquez-Ordás, C. J. (2009). Relation between occupational safety management and firm performance. Safety Science, 47(7), 980–991. https://doi.org/10.1016/j.ssci.2008.10.022

Fornell, C., & Larcker, D. F. (1981). Structural equation models with unobservable variables and measurement error: Algebra and statistics.

Ghozali, I. (2014). Structural Equation Modeling, Metode Alternatif dengan. Partial Least Square (PLS). Edisi, 4.

Ghozali, I., & Latan, H. (2015). Partial least squares konsep, teknik dan aplikasi menggunakan program smartpls 3.0 untuk penelitian empiris. Semarang: Badan Penerbit UNDIP.

Grimaldi, J.V., Simonds, R. H. (1989). Safety Management. Boston: Irwin.

Hair, J. F., Hult, G. T., Ringle, C. M., & Sarstedt, M. (2017). A Primer o Partial Least Squares Structural Equation Modelling (PLS-SEM) (2e Edition). USA: Sage.

Hale, A. R., Heming, B. H. J., Carthey, J., & Kirwan, B. (1997). Modelling of safety management systems. Safety Science, 26(1-2), 121-140.

Haryono, S. (2017). Metode SEM untuk penelitian manajemen dengan AMOS LISREL PLS. Luxima Metro Media, 450.

Hart, S. L., & Dowell, G. (2011). Invited editorial: A natural-resource-based view of the firm: Fifteen years after. Journal of management, 37(5), 1464-1479.

Heinrich, H. W. (1959). Industrial Accident Prevention. New York: Mc-Graw Hill.

Henseler, J., Hubona, G., & Ray, P. A. (2016). Using PLS path modeling in new technology research: updated guidelines. Industrial management & data systems.

Hofmann, D.A., Jacobs, R., Landy, F. (1995). High reliability process industries: individual micro, and macro-organizational influences on safety performance. Journal of Safety Research, 26, 131–149.

HSE. (1997). Successful Health and Safety Management. HSG65. London: HSE Books.

Hughes, G., Kornowa-Weichel, M. (2004). Whose fault is it anyway? A practical illustration of human factors in process safety. Journal of Hazardous Materials, 115, 127–132.

Hunter, W. (1999). Towards better OSH legislation. Magazine of European Agency for Safety and Health at Work, 10–11.

ILO. (2001). ILO Guidelines on Occupational Safety and Health Management Systems (OHS-MS): Information Note. Geneva.

International Civil Aviation Organization Safety management manual (3rd ed.). (2013). Montreal.

J. Paries, L. Macchi, C. Valot, S. D. (2018). Comparing HROs and RE in the light of safety management systems. Safety Science, 117, 501–511. https://doi.org/10.1016/j.ssci.2018.02.026.

Kawka, N., Kirchsteiger, C. (1999). Technical note on the contribution of sociotechnical factors to accidents notified to MARS. Journal of Loss Prevention in the Process Industries, 12, 53–57.

Kirwan, B. (1998). Safety management assessment and task analysis: a missing link? In: Hale, A., Baram, M. (Eds.). Safety Management: The Challenge of Change. Elsevier, Oxford.

Kjellén, U., Boe, K., sand Hagen, H. L. (1997). Economic effects of implementing internal control of health, safety and environment: a retrospective case study of an aluminium plant. Safety Science, 27, 99–114.

Kletz, T. A. (1993). Organizations have no memory when it comes to safety: a thoughtful look at why plants don’t learn from the past. Hydrocarbon Processing, 6, 88–95.

Kornelius, H. (2018). Linking Occupational Health and Safety Management to Sustainable Competitive Advantage of the Firm. Journal of Economics and Business, 1(4), 577–583. https://doi.org/10.31014/aior.1992.01.04.51

Kraaijenbrink, J., Spender, J. C., & Groen, A. J. (2010). The resource-based view: A review and assessment of its critiques. Journal of management, 36(1), 349-372.

Kwon, H. (2006). The effectiveness of process safety management (PSM) regulation for chemical industry in Korea. Journal of Loss Prevention in the Process Industries, 19, 13–16.

Law, W.K., Chan, A.H.S., Pun, K. F. (2006). Prioritising the safety management elements: a hierarchical analysis for manufacturing enterprises. Industrial Management & Data Systems, 106(6), 778–792.

Li, S., Ragu-Nathan, B., Ragu-Nathan, T.S. & Subba Rao, S. (2006). The Impact of Supply Chain Management Practise on Competitive Advantage and Organizational Performance. Omega, 34(1), 107–124.

Li, Y., & Guldenmund, F. W. (2018). Safety management systems: A broad overview of the literature. Safety Science, 103(November 2017), 94–123. https://doi.org/10.1016/j.ssci.2017.11.016

Mitchison, N. and Papadakis, G. (1999). Safety management system under Seveso II: implementation and assessment. Journal of Loss Prevention in the Process Industries, 12, 43–51.

Muniz, B. F., Peon, J. M. M., & Ordas, C. J. V. (2012). Safety climate in OHSAS 18001-certified organisations : Antecedents and consequences of safety behaviour. Accident Analysis and Prevention, 45, 745–758. https://doi.org/https://doi.org/10.1016/j.aap.2011.10.002

Narocki, C. (1999). Si la prevención es rentable ? por qué no la han descubierto los empresarios? una revisión de propuestas para políticas en salud Laboral. Cuadernos de Relaciones Laborales, 14, 101–133.

Nivolianitou, Z.S., Leopoulus, V.N., Konstantinidou, M. (2004). Comparison of techniques for accident scenario analysis in hazardous systems. Journal of Loss Prevention in the Process Industries 1, 7, 467–475.

Novalius, F. (2018). 32 Proyek Konstruksi Layang Asing dan Lokal Dihentikan Pemerintah.

Nursiyono, J. A. (2014). Pengambilan Sampel. Bogor: IN MEDIA.

Osborn, R. N., & Hagedoorn, J. (1997). The institutionalization and evolutionary dynamics of interorganizational alliances and networks. Academy of Management Journal, 40(2), 261-278.

O’Toole, M. (2002). The relationship between employees’ perceptions of safety and organizational culture. Journal of Safety Research, 33, 231–243.

P., A. (2009). The Role of International Standards of Organizations 9001:2000 in Competitive Production in Kenya: A Case Study of Mumias Company Limited. Moi University.

Porter, M. E. (1985). Competitive Advantage : Creating and Sustainable Superior Performance. New York: Simon and Schuster Inc.

Praytino, R. H. (2010). Peranan Analisa Laporan Keuangan dalam Mengukur Kinerja Keuangan Perusahaan: Studi Kasus pada PT. X. Jurnal Manajemen UNNUR Bandung, 2, 9.

Rikhardsson, P.M., Impgaard, M. (2004). Corporate cost of occupational accidents: an activity-based analysis. Accident Analysis and Prevention, 36, 173–182.

Rundmo, T. (1996). Associations between risk perception and safety. Safety Science, 24, 197–209.

Schmidt, J., & Keil, T. (2013). What makes a resource valuable? Identifying the drivers of firm-idiosyncratic resource value. Academy of Management Review, 38(2), 206-228.

Siregar, S. (2013). Metode Penelitian Kuantitatif Dilengkapi dengan Perbandingan Perhitungan Manual dan SPSS (16th ed.). Jakarta: Prenadamedia Group.

Smallman, C., John, G. (2001). British directors perspectives on the impact of health and safety on corporate performance. Safety Science, 38, 227–239.

Sonnemans, P.J.M., Körvers, P. M. W. (2006). Accidents in the chemical industry: are they foreseeable? Journal of Loss Prevention in the Process Industries, 19, 1–2.

Sugiyono. (2014). Metode Penelitian Kuantitatif Kualitatif dan R&D. Bandung: Alfabeta.

Wernerfelt, B. (1984). A resource‐based view of the firm. Strategic management journal, 5(2), 171-180.

DOI: http://dx.doi.org/10.29040/jap.v23i2.7012